Lưu lượng kế_MODEL 2503F
Xuất sứ: JAPAN
Nhà cung cấp: ANS- ANH NGHI SƠN ĐÀ NẴNG
Hãng sản xuất: KOFLOC VIET NAM
Ứng dụng sản phẩm: Other products
Ms. Liên* Đặt điểm
• This flow meter ensures constant flow under constant pressure on its inlet side even if the load pressure loss on the outlet side changes.
• The measuring section of the flow meter is based on the highprecision float type flow meter RK1400.
• The precision valve permits smooth and stable control of very small flow.
• Constant pressure on the inlet side eliminates pressure errors of the float type flow meter, allowing a complete flow control system to be configured.
* Thông số
| Fluids | Air,N2,O2,H2,He,Ar,CO2 (Calibration with actual gas) For other gases, please consult us regarding conversion conditions or calibration with the actual gas to be used. * Option: Scales for two types of fluids |
|
| Flow range (FS) | From 1–10 ML/MIN to 2–20 L/MIN (Refer to the Capacity Table on page 55.) | |
| Accuracy | FS ±2% (Measurement point) (under specified constant primary pressure) | |
| Control pressure | The pressure difference between inlet and outlet must be 0.05 MPa or more. | |
| Proof pressure | 5 L/MIN or less: 0.8 MPa 10 L/MIN or more: 0.5 Mpa |
|
| Available scale | 10:1 | |
| Material | SS | Al |
| Body block | SUS316 | Al, Brass |
| Tapered tube | Pyrex®, glass | |
| Packing | FKM | NBR |
| Float | Pyrex, SUS316, glass | |
| Protective cover | Acrylic resin | |
| Heat resistance | MAX60℃ | |
| Connection | Rc 1/4 (Standard), Rc 1/8 (Optional) | |
